DMG MORI DECKEL MAHO DMU 50 eVolution
DMG MORI DECKEL MAHO DMU 50 eVolution
orCall +1 262-320-3399
Description
5-AXIS MACHINING CENTERS
DECKEL MAHO DMU 50 eVolution
Subject to availability, prior sale, and terms and conditions of standard sales contract, we offer for your consideration:
One used 2003 DMG MORI DECKEL MAHO DMU 50 eVolution 5-Axis simultaneous machining center
-Clamp once, machine 5-Sides-
Table on machine swivels 0-180 degrees and rotates 360 degrees which allows for high speed 5-Sided 5-Axis simultaneous machining with one work piece clamping
Machine was made in Seebach, Germany at DECKEL MAHO-Seebach
HEIDENHAIN Millplus IT control with electronic hand wheel and Ethernet interface
-With 2nd processor card
Work Area
Main Drive
Feed Drives
Tool Magazine
Flood Coolant
NC-Swivel Rotary Table
Equipped With
BLUM Laser tool measuring of tool length and diameter, also with broken tool detection
HEIDENHAIN infrared parts measuring probe
Production Package which consists of:
-580 PSI (40 Bar) coolant thru the spindle with 238 gallon (900 liter) coolant tank
-Air purge for linear measuring system
-Chip conveyor
Heidenhain glass scales (direct path measuring system) X Y Z B C
Machine Dimensions
Specifications
| Manufacturer | DMG MORI |
| Model | DECKEL MAHO DMU 50 eVolution |
| Year | 2004 |
| Condition | Used |
| Stock Number | 064274 |
| Status | Available |
| Number of axis | Full 5-Axis |
| Tool changer | 32 ATC |
| Control | HH Millplus iT |
| Spindle | 18,000 rpm |
| Spindle taper | CAT 40 |
| X axis | 19.7" (500 mm) |
| Y axis | 16.5" (420 mm) |
| B axis | 0-180 degrees |
| Z axis | 15" (380 mm) |
| C axis | 360 x 0.001 degrees |
| Build date for this machine | March 2003 |
| Machine first installed new in the usa | June 2004 |
| Traverse path x (longitudinal) | 19.7” (500 mm) |
| Traverse path y (across) | 16.5” (420 mm) |
| Traverse path z (vertical) | 15” (380 mm) |
| Ac-motor spindle drive power 100% dc | 33.5 HP (25 kW) |
| Ac-motor spindle drive power 40% dc | 46.9 HP (35 kW) |
| Spindle speed | 20-18,000 rpm |
| Maximum spindle torque | 95.9 Ft/Lbs (130 Nm) |
| Number of gear steps | None |
| Spindle bearing diameter | 3.15” (80 mm) |
| Rapid traverse linear axes x/y/z | 1,968.5 ipm (50 m/min) |
| Feed velocity linear axes x/y/z | 787.4 ipm (20 m/min) |
| Storage pockets | 32 positions |
| Maximum tool weight | 13.22 lbs (6 kg) |
| Max. tool diameter without vacant places | 3.15” (80 mm) |
| Max. tool diameter with vacant places | 4.13” (105 mm) |
| Maximum tool length | 11.02” (280 mm) |
| Chip to chip time | Approximately 6 seconds |
| Amount of coolant | 52.8 gallons (200 l) |
| Flow rate | 5.28 gallon/minute (20 l/minute) |
| Clamping surface | 19.7” x 15.0” (500 x 380 mm) |
| Swivel range (swivel) b-axis | 0-180 degrees |
| Swivel range (rotary) c-axis | 0-360 degrees |
| Rapid traverse, (swivel) b-axis | 26 rpm |
| Rapid traverse, (rotary) c-axis | 33 rpm |
| Maximum table load | 441 lbs (200 kg) |
| Table measuring system | Direct path measuring system in both axes |
| Table cooling | Drive cooling for B and C axis with heat exchanger |
| Table swivel time, horizontal/vertical | Approximately 1.5 seconds |
| Machine length | Approximately 140” |
| Machine width | Approximately 88” |
| Machine height | Approximately 97” |
| Machine weight | Approximately 12,566 lbs (5700 kg) |