DMG MORI DMU 50 eVolution 5-Axis VMC, 18k rpm, 60 ATC

Subject to availability, prior sale, and terms & conditions of FRANKE CNC Sales Agreement, we offer for your consideration:

One used 2002 DMG MORI DECKEL MAHO DMU 50 eVolution full 5-Axis simultaneous VMC:

Fly into MKE to inspect under power in our Wisconsin showroom by appointment

History

Machine was manufactured at DECKEL MAHO Seebach GmbH in Seebach, Germany 5/2002

First installed new in the USA 6/2002

Clamp once, machine 5-sides

Table on machine swivels 0-180 degrees and rotates 360 degrees which allows for 5-sided 5-axis simultaneous machining with 1 workpiece clamping.

Working area

Longitudinal (X) 19.7" (500 mm)

Transverse (Y) 16.5" (420 mm)

Vertical (Z) 15.0" (380 mm)

Main drive

AC motor spindle drive power 100% DC 33.5 hp (25 kW)

AC motor spindle drive power 40% DC        46.9 hp (35 kW)

Work spindles, tool mounting                         CAT 40

Speed range                                                   18,000 rpm

Number of gear steps                                     None

Maximum spindle torque                               95.9 ft/lbs (130 Nm)

Spindle bearing diameter                              3.15” (80 mm)

Tool changer

Number of tools                                               60

Maximum tool weight                                    13.22 lbs (6 kg)

Maximum tool diameter wo vacant places  3.15” (80 mm)

Maximum tool diameter with vacant places   4.13” (105 mm)

Maximum tool length                                     11.02” (280 mm)

Chip to chip time                                            Approximately 6 seconds

Feed

Feed range, linear axes                              787.4 ipm (20 m/min)

Rapid traverse, linear axes                          1,968 ipm (50 m/min)

Path measuring system

Direct, Heidenhain glass scales, resolution  1 um (0.00004”) for X/Y/Z

Control

Heidenhain MillPlus                                      With electronic handwheel control

Weight

Weight of machine with NCSRT                  Approximately 11,374 lbs

NC-rotary table with NC-swivel axis

Clamping area                                              19.7” diameter x 15” (500 mm x 380 mm)

Center bore                                                    1.2” H6 diameter

No./Spacing of T-slots                                    5/2.5” 14H7

Swivel axis (B axis)                                        0 degrees through 180 degrees

Rapid traverse (Swivel B axis)                       26 rpm

Table swivel time, horizontal to vertical          Approximately 1.5 seconds

Rotary axis (C axis)                                       0-360 degrees (continuous, full 4th axis)

Rapid traverse (Rotary C axis)                      33 rpm

Table loading maximum                                 440 lbs (200 kg)

Table measuring system                                Direct, Heidenhain angle encoders for B & C axes

Table cooling                                                  Drive cooling for B & C axis with heat exchanger

Flood coolant

Amount of coolant                                        52.8 gallons (200 l)

Flow rate                                                        5.28 gallon/minute (20 l/minute)

Price quoted in United States Dollars                                    

Price quoted is FOB Origin

To the best of our knowledge all details listed above are deemed correct. It is the Buyer's responsibility to confirm all details including condition, capacity, suitability or performance and we encourage an under power inspection of the machine(s) and accessories prior to purchase.